Products Catalog: Manual moulds silicone rubber - Hong Ye Silicone Manufacturer

Products Catalog: Manual moulds silicone rubber

(Product Photo)

Origin:

China

Price:

USD 3.70-11.20

Payment Method:

Telegraphic Transfer (T/T)

Pack. & Delivery:

25kg/drum, 200kg/drum

Specification:

Silicone rubber for manual moulding applications

The manual mold silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.

Silicone rubber for manual moulding features

the manual mold silicone rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.

Silicone rubber for manual moulding operations

Firstly process and prepare the model mould or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mould can be solidified and formed in 2-3 hours.

( Note: our company does not recommend you to add silicone oil. If a special soft silicone mould or fine detailed and complex patterns products are required, 5% -10% silicone oil can be added to soften the mold for easy demould.)

Frequently asked questions for Silicone rubber for manual moulding

What should we do when the air bubbles appeared in the process of mould making ?

To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicone rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicone rubber and the curing agent from former 4% to 1% -2% . In this way, the pre-crosslinking time of silicone rubber will slow down, so, the air in the mold will be eliminated gradually to reduce the air bubbles.

Any further information required , please visit www( dot) szrl( dot) net, and you are also welcomed to contact me anytime by sending email to hyl( at) szrl( dot) net, or skype: shirleylq, telephone 0086-755-89948019 and the mobile 0086-13760160946. Hope to cooperate with you.

hyl@szrl.net

Your inquiry will be recorded in "Member Trade Mail".

Recommend to your friends